Plumbing Systems

Water in, water out, safely heated and leak-free.

What We Inspect

We locate the main water shut-off, check static water pressure, and run fixtures throughout the home to evaluate supply and drainage. We inspect visible supply and drain piping and traps, toilets, tubs and showers, the water heater with its temperature and pressure relief valve, discharge piping, venting and drain pan, and the gas distribution system, including bonding and sediment traps. Drain lines under the slab are not visible during a standard inspection; a sewer scope camera inspection is available for that.

Common North Texas Findings

These are the conditions that come up most often in our reports for this part of the home:

• Water heaters with missing or improper TPR discharge piping, missing drip-pan overflow lines, poor venting or a missing sediment trap on the gas line.
• Leaks at trap connections, faucets and shower heads, and slow or poorly draining fixtures.
• Loose toilets at the floor and missing or inoperable sink stoppers.
• Water pressure that measured too high or too low.
• Aging pipe materials in older homes, such as corroded galvanized drains and cast iron.
• Gas piping, including CSST, checked for bonding as TREC standards require.

Why It Matters

Small leaks become big repairs when they run inside walls or under floors, and water heater safety devices exist to prevent serious hazards. A careful plumbing evaluation helps you prioritize safety corrections and spot older materials that may need attention.

← Back to Residential Home Inspection

Helpful Resources

• EPA WaterSense: water-efficient fixtures and irrigation
• EPA: A brief guide to mold, moisture and your home
• TREC Property Inspection Report form

Schedule Your Inspection

Book online in minutes or request a quote. Prefer to talk it through? Call (817) 454-1066 or email info@dragonflyinspections.com.

Schedule InspectionGet a Quote